The der8enchtable is a collaboration between Thermal Grizzly, Jon “elmor” Sandström (ElmorLabs), and Roman “der8auer” Hartung. It includes features typical of a standard benchtable, such as mounts for radiators and a power supply, plus an integrated PCB for connecting hardware.

To provide consistent test results, it has three fan controllers with three 4-pin headers each. Each fan zone can operate at 50% or 100% speed, providing up to 3 A of power and individual fuse protection. The fan zones can also be controlled externally via the motherboard.

• Professional benchtable with active PCB
• Developed in collaboration with ElmorLabs and der8auer
• 3+1 control zones for fans and AIOs
• Supports SSD, USB, or microSD for OS and test software
• Compact, modular, and user-friendly frame design
• Compatible with air and AIO coolers
• A-RGB lighting

In addition to the fan-control zones, the base unit with integrated PCB offers a secondary control zone with two 4-pin headers for pumps or fans, featuring the same control options as the fan zones. The pump zone supplies 3 A per port—6 A total—and each port has its own fuse. Peripherals can be connected to the der8enchtable via USB (4× Type-A, 2× Type-C). Testing and benchmarking hardware typically requires drivers, a BIOS, or an operating system. To simplify this, storage media can be mounted directly on the benchtable. Up to two 2.5-inch SSDs can be installed on the PCB, and the PCB also provides four microSD card slots—a cost-effective alternative to solid-state drives (SSDs) in terms of price per gigabyte.

The test motherboard connects to the der8enchtable via a 9-pin USB header, while the der8enchtable is powered by the PSU through a PCIe 6-pin cable. Addressable RGB lighting (aRGB) can be controlled through a 3-pin header connected to the motherboard or by using an external RGB controller (not included). The PCB also features a power button and reset function wired to the motherboard.

The der8enchtable's PCB includes adjustable standoffs for ATX, Micro-ATX, and Mini-ITX motherboards. It features a mount for a power supply in the black-anodized aluminum frame and includes a custom Velcro strap for cable management. If the lower frame section is not needed, the feet can be directly attached to the base unit, making it more compact.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

🚩Port Overview:

1× 9-pin USB header (data connection to motherboard)
1× PCIe 6-pin header (power supply from PSU)
1× 4-pin header (for PWM signal to external fan control)
3× Fan Zones (each with 3× 4-pin fan headers)
1× Pump Zone (2× 4-pin pump headers)
4× MicroSD slots for memory cards
2× On-board SATA connectors
2× SATA out connectors
4× USB 2.0 Type-A (max. 500 mA)
2× USB 2.0 Type-C (max. 3 A)
1× 2-pin header for power button
1× 2-pin header for reset button
1× 3-pin aRGB header (GND / – / D / 5V)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

🚩Scope of Delivery

• Manual
• Base Assembly with integrated PCB
• AIB Securing Bracket
• Radiator Bracket
• Right Stand Bracket
• Left Stand Bracket
• PSU Support Bracket
• PSU Mounting Bracket
• Damper Feet
• DIN7991 M3 x 16mm Screw
• DIN7985H M3 x 12mm Screw - A2
• DIN912 M3 x 5mm Screw - A2
• DIN912 M4 x 6mm Screw
• 6-32 UNC x 1/4in Phillips Head Screw - A4
• M3 HEX Nut -A2
• M3 x 12mm Barrel Nut - A4
• Allen Key 2 mm
• Allen Key 2.5 mm
• Allen Key 3 mm
• Double female 2-pin Dupon cable, 20cm
• Double female 4-pin Fan cable, 30cm
• Double sided Velcro Strap
• Double female 3-pin A-RGB cable, 30cm
• Double 9-pin USB 2.0 cable, 15cm